You don’t need a major automation project to get an experienced engineer on site. Advanced Automation provides fault-finding and software modifications for existing control systems, including equipment supplied and programmed by other companies.
A small modification to a customer’s steam valve control logic addressed unwanted tank heating. The work focused on how the shut-off valve was controlled, with testing carried out at the installation shown in the photograph.
A small change to steam valve control
The steam shut-off valve was remaining open while steam was passing through a downstream modulating valve, even in its fully closed position. This allowed steam to continue entering the system, causing the water in the tank to boil and raising a safety concern.
Our investigation found that the shut-off valve was programmed to stay open whenever water was present in the tank, regardless of heating demand. The presence of water kept the steam supply available even when the process did not need more heat.
We modified the control logic to use the actual water temperature and close the steam shut-off valve when heating is not required. This was a focused change to the existing control software, addressing a specific problem in how the system operated.
The software change controls when the shut-off valve closes; it does not alter the physical condition of the downstream modulating valve. A modulating valve’s shut-off performance depends on its design and leakage specification. Spirax Sarco’s guidance on control valve leakage explains this distinction.
On-site expertise for existing equipment
A control fault needs to be understood in the context of the equipment it affects. We can visit your site to assess how the system is behaving, review the control logic and discuss the symptoms with the people who operate and maintain it.
That gives the investigation a practical starting point: what the machine should be doing, what it is actually doing and the conditions under which the problem occurs. Operator observations, alarm records and process readings can help identify where the behaviour differs from the intended sequence.
Our on-site support includes help with faults, changes and improvements. We explain what needs to change and agree the work required, with testing appropriate to the modification.
Support for systems supplied by other companies
The original equipment supplier is not always the only route to controls support. Advanced Automation can review and modify software written by other companies, starting with an assessment of the existing system and the information available.
Before making changes, we review the available program and take a backup. If original project files are missing, we assess what can be recovered and explain any limitations before agreeing the work. Clear documentation and a backup of the modified software help your team support the system afterwards.
Siemens and Rockwell are our core PLC platforms. If your equipment uses another platform, tell us what is installed and we will confirm whether we can help. Our PLC programming service covers changes to existing code as well as new software.
Small modifications are welcome
We take on individual control faults and software changes as well as larger automation projects. That can include correcting a sequence, changing an operating condition or reviewing code that is difficult to maintain.
The scope should follow the problem. Where a small modification is appropriate, we can carry out that work. Where the investigation identifies a wider issue, we explain it so you can decide how to proceed.
Talk directly to an engineer
If your equipment is behaving unexpectedly, contact Advanced Automation. Tell us what the system should do, what you are seeing and which control equipment is installed. We will discuss the options and tell you whether we can help.
Call +44 (0)1535 655151 or email sales@ae.group.


