Services/Drive and motor control
Drive and motor control
Motors and drives controlled as part of your automation, and complete drive packages that bring the gearbox, motor control and automation together.
Services/Drive and motor control
Motors and drives controlled as part of your automation, and complete drive packages that bring the gearbox, motor control and automation together.
An Advanced Engineering Group company
Overview
Almost every automated process depends on motors: conveyors, mixers, pumps, fans and shredders. How those motors are started, controlled and protected affects energy use, product handling and the life of the mechanical equipment.
We select, configure and integrate variable speed drives and motor control with your PLC, so speeds, starts and stops are controlled properly and faults are clear. And because our sister company Advanced Drives supplies gearboxes and geared motors, we can offer the complete drive package.
What’s included
From a single starter to the drives for a complete line.
Selection, configuration and integration with your PLC, for smooth control and energy savings where speed can be reduced.
Direct on line and star delta starters, soft starters and motor protection, matched to the duty.
Drives connected to the PLC over industrial networks such as PROFINET and EtherNet/IP, for status and diagnostics.
Gearbox, motor control and automation designed together, with gearboxes and geared motors from Advanced Drives.
Replacing obsolete drives and starters, and adding speed control to existing machines.
Drives commissioned and tuned to suit the load and the process.
How it works
01
We look at the load, the speed range and how the machine needs to start and stop.
02
Drive, motor control and, where needed, the gearbox chosen together.
03
Panel build and PLC software to control and monitor every drive.
04
Set up and tuned on site, with settings recorded and backed up.
One group
Our sister company Advanced Drives supplies industrial gearboxes and geared motors for conveyors, mixers, shredders and processing equipment. Together, we can supply the mechanical drive and its control as one package.
Gearbox, motor and control selected together, so they are properly matched.
One conversation for the mechanical and electrical side of the drive.
For hydraulic machines, Advanced Components supplies Kawasaki pumps and Staffa motors, and we can provide the control.
Yes. Gearboxes and geared motors come from our sister company Advanced Drives, so the mechanical drive and its control can be supplied as one package.
Often, yes. We look at the motor, the load and the existing controls, then recommend whether a drive is suitable and what else needs to change.
We select drives to suit your application, your PLC platform and any site standards you have. If your plant already standardises on a brand, we will work with it.
Related services
PLC, motor control and drive panels, designed, built and tested to the relevant standards.
New software and changes to existing code on Siemens and Rockwell platforms.
Testing, commissioning, training and support after handover.
Industries we serve
Talk to us
Tell us about the machine and the load. We can help with the control, and with the gearbox too.