From 20 January 2027, the EU Machinery Regulation (EU) 2023/1230 replaces the Machinery Directive 2006/42/EC, which has governed machine safety in Europe for well over a decade. It applies directly in every EU member state, subject to its transitional provisions, and it makes requirements for safety software, cybersecurity and machine modifications more explicit. UK manufacturers are affected in several ways, even though Great Britain is outside the EU.

This guide explains what changes for machine control and safety systems, and what to do before the deadline.

EU Machinery Regulation: key dates

The Regulation was adopted in 2023. Its main application date is 20 January 2027, when the Machinery Directive (2006/42/EC) is repealed. Some provisions have earlier application dates; Article 54 sets these out, including notified-body provisions from 20 January 2024. Machinery lawfully placed on the EU market under the Directive before 20 January 2027 can continue to be made available under the transitional provisions. Existing machines do not need a new conformity assessment simply because the date has changed.

Who it affects in the UK

Machine builders selling into the EU and Northern Ireland

From 20 January 2027, machinery first placed on the EU market must meet the Regulation rather than the Directive. It also covers machinery first put into service for the manufacturer’s own use. Northern Ireland applies the EU rules under the Windsor Framework. The placing-on-the-market or putting-into-service event matters; an order or design date alone does not determine the applicable rules.

Great Britain: CE marking still accepted

Great Britain retains the Supply of Machinery (Safety) Regulations 2008 and recognises CE marking alongside UKCA marking. S.I. 2026/867 was made on 22 July 2026 and comes into force on 20 January 2027. It updates the GB routes to recognise machinery meeting the relevant requirements of the EU Machinery Regulation, subject to the conditions set out in the amended UK regulations, including English-language documentation. Continued recognition has therefore been legislated for; it is no longer just a government intention. The EU Regulation does not automatically replace GB domestic machinery law.

Plants that modify their own machines

From 20 January 2027, a business that substantially modifies machinery in the EU or Northern Ireland takes on the manufacturer’s obligations under the Regulation. That matters to UK groups with sites in Europe, and to anyone exporting rebuilt or upgraded equipment. A documented change assessment is also useful at GB sites, without assuming that EU rules apply there automatically. Users of machinery in GB also remain responsible, under PUWER, for keeping work equipment safe after any change.

EU Machinery Regulation changes for control systems

Software can be a safety component

The Regulation explicitly includes software within the definition of a safety component. Independently supplied safety software can qualify where it meets the complete definition in Article 3(3); performing a safety function alone is not the whole test. On a justified request, the source code or programming logic of safety-related software must be made available to the authorities, as far as needed to check conformity. For plant owners, clear ownership of safety software and its documentation matters more than ever.

Protection against corruption and cyber attack

Annex III, sections 1.1.9 and 1.2.1, introduce explicit requirements for protection against corruption and the safety of control systems:

  • Hardware providing a connection or access to software critical to safety compliance must be adequately protected against accidental or intentional corruption.
  • Software and data critical to compliance must be identified and protected.
  • Connections to other devices must not create hazardous situations. Control systems must withstand reasonably foreseeable malicious interference, as appropriate to the circumstances and risks.
  • Machinery must collect evidence of legitimate and illegitimate interventions in relevant hardware and software, including software and configuration changes.

In practice this reaches remote access, network connections and how PLC and safety software updates are controlled. Section 1.2.1(f) also requires a tracing log of interventions and uploaded safety-software versions to be enabled for five years after upload, to demonstrate conformity following a reasoned request from a competent authority.

Machine learning in safety functions

Safety components using fully or partially self-evolving machine learning to ensure safety functions fall within Annex I, Part A. Machinery with such embedded systems also falls within Part A in respect of those systems where they have not been marketed independently. These categories require notified-body involvement under Article 25(2). Identify the product category and assessment route with your conformity specialist; a conventional PLC does not remove other assessment obligations.

Digital instructions

Instructions can be supplied digitally under Article 10(7). Users must be told how to access them and be able to print, download and save them for use during a breakdown. They must remain accessible online for the machine’s expected lifetime and for at least ten years after it is placed on the market. If requested at purchase, paper instructions must be supplied free within one month. Essential safety information must still be supplied on paper for machinery intended for, or reasonably foreseeably used by, non-professional users. The applicable language requirements also remain.

Substantial modification: the change that matters most for upgrades

The Regulation defines a substantial modification. In commercial and industrial use, Article 18 treats the person carrying it out as the manufacturer, with the obligations in Article 10. There is a specific exception for a non-professional user modifying their own machinery solely for their own use.

The four-part test

Under Article 3(16), a modification is substantial only if all four of these apply:

  1. It is made by physical or digital means after the machine was placed on the market or put into service.
  2. It was not foreseen or planned by the original manufacturer.
  3. It affects safety by creating a new hazard or increasing an existing risk.
  4. It requires either additional guards or protective devices whose processing necessitates a change to the existing safety control system, or additional protective measures for stability or mechanical strength.

Apply the complete legal definition to the actual modification, and record the reasoning with a competent machinery-safety specialist. A change that does not meet this definition may still require safety assessment and testing.

Software changes count

The words “physical or digital” matter. A change to control logic can be a substantial modification just as a mechanical rebuild can, and this is where plants are most likely to be caught out: a PLC change is easily treated as a routine software task.

What a modifier takes on

The manufacturer’s obligations include a risk assessment against the essential requirements, technical documentation, the right conformity assessment procedure, an EU declaration of conformity, CE marking and instructions for use. In a set of machines, responsibility can be limited to the affected machine if the risk assessment shows the change has no effect on the safety of the rest.

Typical examples

Use these examples to identify changes needing review. The complete legal test and the documented risk assessment determine the outcome:

Change Likely outcome Why
Like-for-like PLC replacement, same functions and safety logic Usually not substantial Provided validation confirms no new hazard or increased risk and unchanged safety performance
Faster cycle times or higher speeds Needs assessment Stopping distances and risks can change
Update to safety-related software Needs assessment Check all four conditions, including whether additional protective measures are required
New robot cell, axis or conveyor section needing new guarding wired into the safety system Likely substantial If unplanned by the manufacturer and all four conditions apply; a new assembly may also require assessment in its own right

EU Machinery Regulation checklist before January 2027

  1. List your machines and where their declarations of conformity, instructions and change records are kept.
  2. Time planned upgrades. Identify the destination market and relevant placing-on-the-market or putting-into-service date. Under the Directive, a major rebuild can already create de facto new machinery requiring assessment. From 20 January 2027, apply the Regulation’s defined substantial-modification test where that Regulation applies.
  3. Put a check in front of control changes, so someone asks whether a change creates a new hazard or touches the safety system before work starts.
  4. Control software versions. Decide who may update PLC and safety software, and how each version is recorded.
  5. Review remote access and network connections to machines with safety functions.
  6. Update purchase specifications to state which rules a delivery must meet and which future changes the manufacturer’s documentation covers.
  7. Name one person to judge when a change reaches the threshold, and take specialist advice on specific cases.

How Advanced Automation can help

We design and implement control and safety functions for new and upgraded machines, working from your approved risk assessment and cause and effect documentation. Where a risk assessment or conformity assessment is needed, we work alongside your appointed safety specialist, and we supply the documentation, software version records and test evidence that compliance depends on.

If you are planning an upgrade around the January 2027 deadline, talk to us early. Find out more about our machine safety service, or discuss your project with us.

Frequently asked questions

When does the EU Machinery Regulation apply?

From 20 January 2027, when it replaces the Machinery Directive 2006/42/EC in every EU member state. Its rules on notified bodies have applied since 20 January 2024.

Does the Machinery Regulation apply in the UK?

The Regulation applies in Northern Ireland from 20 January 2027 under the Windsor Framework. Great Britain retains its domestic machinery legislation. S.I. 2026/867, made in July 2026 and effective from 20 January 2027, updates the GB routes to recognise machinery meeting the relevant EU Regulation requirements, subject to the conditions in UK law.

Do existing machines need to be certified again?

No new conformity assessment is required solely because the Regulation starts to apply. Machinery lawfully placed on the EU market under the Directive before 20 January 2027 benefits from the transitional provisions. A subsequent substantial modification can trigger assessment under the Regulation; continuing duties to keep machinery safe still apply.

Can a software change be a substantial modification?

Yes. The Regulation covers changes made by physical or digital means, so a control or safety software change can be substantial if it meets all four parts of the test.

Who becomes the manufacturer after a substantial modification?

Article 18 places manufacturer obligations on the person carrying out the substantial modification, with provisions for affected machinery within an assembly. Establish the applicable legal responsibilities before work starts; a contract alone cannot override statutory duties.

This article is general guidance, not legal advice. For a specific modification, take specialist advice.

Sources and further reading

Sources checked 28 October 2026. Confirm the current legal requirements, applicable standards and conformity-assessment route for your project.